Details
Design: Ball Bearing Disc Springs are designed in two different styles.
Plain Ball Bearing Disc Springs:
Plain Ball Bearing disc springs assist in maintaining positioning accuracy of the bearing (with no end play) and also decrease vibration and shaft deflections. Correct preloading will also increase bearing rigidity and negate excessive running noise.
Plain Ball Bearing disc springs with high force, low deflection and pronounced regressive spring characteristics are for backlash compensation, silencing and protection of ball bearings.
A note of caution however when considering columns of these disc springs. A ratio of cone height/thickness in excess of 1.50 could cause springs to invert and the column to collapse.
Outside diameters OD ranging from 9.8 - 358mm (0.386" - 14.1")
Slotted Ball Bearing Disc Springs:
This range of slotted ball bearing disc springs have a slotted inside profile which gives a different force/deflection profile to plain ball bearing disc springs.
Slotted Ball bearing disc springs with low force and large deflection characteristic are increasingly required for use with small size ball bearings.
Slotted Ball Bearing Disc Springs are referenced by the Ball Bearing Designation Number in our documentation for convenient selection. In cases where higher spring forces are required, the slotted Ball Bearing Disc Springs can be stacked in parallel for corresponding factors of two or more.
A note of caution however when considering columns of these disc springs. A ratio of cone height/thickness in excess of 1.50 could cause springs to invert and the column to collapse.
Outside diameters OD ranging from 9.8 - 94.5mm (0.386" - 3.72")
Applications: Ball Bearing
Materials: 65Mn, 60Si2Mn, 60Si2MnA, 50CrVA
Surface Treatment: Bluing, Electrophoresis, Phosphating, Electroplating, Mechanical Plating, Dacromet, Geomet, Shot blasting.
Support: 0086-135-8433-1706 | |||||||||
E-mail:shelly_xr@hotmail.com |
轴承预紧用碟形弹簧(无槽)
Ball Bearing Disc Spring (Plain) mm
Art. No. | Specification mm | Used for (Ball Bearing Model) | Spring Deflection in mm and spring Load F in N | N.W. 1K(pcs) kg | ||||
D | d | t | H0 | F | f | |||
4001 | 9.80 | 6.20 | 0.20 | 0.40 | 623(EL3) | 23 | 0.15 | 0.068 |
4002 | 12.80 | 7.20 | 0.25 | 0.50 | 624(EL4) | 29 | 0.19 | 0.167 |
4003 | 15.80 | 8.20 | 0.25 | 0.55 | 625(EL5) 634(R4) | 23 | 0.23 | 0.275 |
4004 | 18.80 | 9.20 | 0.30 | 0.65 | 636(EL6) 635(R5) | 31 | 0.26 | 0.487 |
4005 | 18.80 | 10.20 | 0.35 | 0.70 | 607(EL7) | 51 | 0.26 | 0.526 |
4006 | 21.80 | 12.30 | 0.35 | 0.75 | 608(EL8) 627(R7) | 46 | 0.30 | 0.684 |
4007 | 23.70 | 14.30 | 0.40 | 0.90 | 609(EL9) | 81 | 0.38 | 0.862 |
4008 | 25.70 | 14.30 | 0.40 | 0.90 | 6000 629(R9) | 63 | 0.38 | 1.105 |
4009 | 27.70 | 17.30 | 0.40 | 1.00 | 6001 | 80 | 0.45 | 1.132 |
4010 | 29.70 | 17.40 | 0.40 | 1.10 | 6200 | 83 | 0.53 | 1.406 |
4011 | 31.70 | 20.40 | 0.40 | 1.10 | 6002 6201 | 81 | 0.53 | 1.422 |
4012 | 34.60 | 20.40 | 0.40 | 1.10 | 6300 | 61 | 0.53 | 1.894 |
4013 | 34.60 | 22.40 | 0.50 | 1.20 | 6003 6202 | 118 | 0.53 | 2.103 |
4014 | 36.60 | 20.40 | 0.50 | 1.30 | 6301 | 110 | 0.60 | 2.805 |
4015 | 39.60 | 25.50 | 0.50 | 1.30 | 6203 | 110 | 0.60 | 2.783 |
4016 | 41.60 | 25.50 | 0.50 | 1.40 | 6004 6302 | 113 | 0.68 | 3.282 |
4017 | 46.50 | 30.50 | 0.60 | 1.50 | 6005 6204 6303 | 153 | 0.68 | 4.486 |
4018 | 51.50 | 35.50 | 0.60 | 1.50 | 6205 6304 | 135 | 0.68 | 5.059 |
4019 | 54.50 | 40.50 | 0.60 | 1.50 | 6006 | 141 | 0.68 | 4.822 |
4020 | 61.50 | 40.50 | 0.70 | 1.80 | 6007 6206 6305 | 176 | 0.83 | 9.121 |
4021 | 67.50 | 50.50 | 0.70 | 1.70 | 6008 | 161 | 0.75 | 8.505 |
4022 | 71.50 | 45.50 | 0.70 | 2.10 | 6306 | 185 | 1.05 | 12.990 |
4023 | 71.50 | 50.50 | 0.70 | 2.10 | 6207 | 218 | 1.05 | 10.900 |
4024 | 74.50 | 55.50 | 0.80 | 1.90 | 6009 | 211 | 0.83 | 11.990 |
4025 | 79.50 | 50.50 | 0.80 | 2.30 | 6307 | 228 | 1.13 | 18.400 |
4026 | 79.50 | 55.50 | 0.80 | 2.30 | 6010 6208 | 263 | 1.13 | 15.780 |
4027 | 84.50 | 60.50 | 0.90 | 2.50 | 6209 | 359 | 1.20 | 19.050 |
4028 | 89.50 | 60.50 | 0.90 | 2.50 | 6308 | 288 | 1.20 | 23.860 |
4029 | 89.50 | 65.50 | 0.90 | 2.50 | 6011 6210 | 335 | 1.20 | 20.360 |
4030 | 94.50 | 75.50 | 1.00 | 2.20 | 6012 | 325 | 0.90 | 19.570 |
4031 | 99.00 | 65.50 | 1.00 | 2.60 | 6309 | 292 | 1.20 | 33.640 |
4032 | 99.00 | 70.50 | 1.00 | 2.60 | 6013 6211 | 332 | 1.20 | 29.440 |
4033 | 109.00 | 70.50 | 1.25 | 2.70 | 6310 | 357 | 1.09 | 52.800 |
轴承预紧用碟形弹簧(有槽)
Ball Bearing Disc Spring (Slotted) mm
Art. No. | Specification mm | Used for (Ball Bearing Model) | Spring Deflection in mm and spring Load F in N | N.W. 1K(pcs) kg | ||||
D | d | t | H0 | F | f | |||
5001 | 9.80 | 6.20 | 0.15 | 0.60 | 623(EL3) | 13 | 0.35 | 0.050 |
5002 | 12.80 | 7.20 | 0.20 | 0.65 | 624(EL4) | 18 | 0.35 | 0.130 |
5003 | 15.80 | 8.20 | 0.25 | 0.75 | 625(EL5) 634(R4) | 20 | 0.40 | 0.250 |
5004 | 18.80 | 9.20 | 0.25 | 1.00 | 636(EL6) 635(R5) | 20 | 0.55 | 0.440 |
5005 | 18.80 | 10.20 | 0.25 | 1.05 | 607(EL7) | 24 | 0.60 | 0.320 |
5006 | 21.80 | 12.30 | 0.25 | 1.25 | 608(EL8) 627(R7) | 24 | 0.75 | 0.420 |
5007 | 23.70 | 14.30 | 0.30 | 1.30 | 609(EL9) | 25 | 0.75 | 0.660 |
5008 | 25.70 | 14.30 | 0.30 | 1.40 | 6000 629(R9) | 28 | 0.80 | 0.700 |
5009 | 27.70 | 17.30 | 0.35 | 1.45 | 6001 | 31 | 0.80 | 0.984 |
5010 | 29.70 | 17.30 | 0.35 | 1.55 | 6200 | 32 | 0.90 | 1.200 |
5011 | 31.70 | 20.40 | 0.35 | 1.55 | 6002 6201 | 33 | 0.90 | 1.270 |
5012 | 34.60 | 20.40 | 0.35 | 1.65 | 6300 | 32 | 1.00 | 1.650 |
5013 | 34.60 | 22.40 | 0.35 | 1.55 | 6003 6202 | 32 | 0.90 | 1.500 |
5014 | 36.60 | 20.40 | 0.40 | 1.90 | 6301 | 35 | 1.10 | 2.280 |
5015 | 39.60 | 25.50 | 0.40 | 1.90 | 6203 | 37 | 1.10 | 1.920 |
5016 | 41.60 | 25.50 | 0.45 | 2.05 | 6004 6302 | 39 | 1.20 | 2.500 |
5017 | 46.50 | 30.50 | 0.45 | 2.05 | 6005 6204 6303 | 44 | 1.20 | 2.840 |
5018 | 51.50 | 35.50 | 0.45 | 2.10 | 6205 6304 | 47 | 1.25 | 3.070 |
5019 | 54.50 | 40.50 | 0.45 | 2.15 | 6006 | 53 | 1.30 | 3.200 |
5020 | 61.50 | 40.50 | 0.55 | 2.55 | 6007 6206 6305 | 54 | 1.50 | 6.020 |
5021 | 67.50 | 50.50 | 0.50 | 2.60 | 6008 | 78 | 1.60 | 5.500 |
5022 | 71.50 | 45.50 | 0.60 | 2.90 | 6306 | 74 | 1.70 | 9.600 |
5023 | 71.50 | 50.50 | 0.60 | 2.90 | 6207 | 127 | 1.70 | 8.200 |
5024 | 74.50 | 55.50 | 0.60 | 2.90 | 6009 | 91 | 1.70 | 7.580 |
Art. No. | Specification mm | Used for (Ball Bearing Model) | Spring Deflection in mm and spring Load F in N | N.W. 1K(pcs) kg | ||||
D | d | t | H0 | F | f | |||
5025 | 79.50 | 50.50 | 0.70 | 3.10 | 6307 | 83 | 1.80 | 16.260 |
5026 | 79.50 | 55.50 | 0.70 | 2.90 | 6010 6208 | 127 | 1.65 | 14.500 |
5027 | 84.50 | 60.50 | 0.75 | 3.15 | 6209 | 78 | 1.80 | 13.000 |
5028 | 89.50 | 60.50 | 0.80 | 3.30 | 6308 | 104 | 1.90 | 18.100 |
5029 | 89.50 | 65.50 | 0.80 | 3.40 | 6011 6210 | 189 | 1.95 | 16.000 |
5030 | 94.50 | 75.50 | 0.80 | 3.45 | 6012 | 206 | 2.00 | 13.300 |